A photographic exploration
…of my new Sequential Multi-Trak. Planned work:
- Replace the battery
- Install the new Tauntek/Bob Grieb firmware
- Perform battery drain / current draw mod (if necessary)
- Replace buttons which have yellowed over time
- Replace foam in the flight case
-
- The synth came in this nice, slim flight case. Unfortunately the foam is rotten, so it won’t be going back in its case until I can find some replacement foam …
-
- This is where the battery drain mod is performed. The lower leg of one of the resistors is lifted, and connected to a pin on the IC.
-
- I soldered in this replacement battery one one side only, then realized it’s installed backwards.
Some Links of Interest
- http://www.matrixsynth.com/2007/01/sequential-circuits-multitrak-battery.html
- http://synthwise.com/feeds/analogue/sequential-circuits-multitrak-battery-leak-fix
- http://www.synthfind.com/sequential-circuits/sequential-circuits-multi-trak-63/
- http://www.synthfind.com/sequential-circuits/sequential-circuits-multi-trak-62/
- http://www.larson-tech.com/Fall2004/Synthesizer/menu.html
- https://www.gearslutz.com/board/electronic-music-instruments-electronic-music-production/988970-sequential-six-track-vs-multitrack-2.html
This is great! Please show us your future work!